(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Children's Library | Biodiversity Heritage Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "Circuits"

Raspberry Pi Enclosure v1 Assembly 



Make] Projects 

hhiiilH ho/ 1 !/ tuMaal/ chare r\icf*f\\tat* 



build, hack, tweak, share, discover,- 



Raspberry Pi Enclosure vl 

Assembly 

Written By: Eric Weinhoffer 

O PARTS: 

Raspberry Pi Enclosure (1) 



SUMMARY 

This guide will show you how to assemble the simple Pi enclosure that's included in the 
Maker Shed Raspberry Pi Starter Kit . 

If you have v2 of the enclosure (if there's nuts and bolts in the bag), go here . 



© Make Projects www.makeprojects.com Page 1 of 4 



Raspberry Pi Enclosure v1 Assembly 



Step 1 — Raspberry Pi Enclosure vl Assembly 




• You should have nine parts in total: 
four side pieces, one bottom piece, 
and four small locks. 

• If your parts look a lot 
different, and there are 
some nuts and bolts in the bag as 
well, head over to the v2 
instructions. 



A 



Step 2 




• Place your Raspberry Pi onto the 
bottom piece. The headers, SD 
card slot, and USB power port 
should be above the side with the 
two small rectangles. 



© Make Projects 



www.makeprojects.com 



Page 2 of 4 



Raspberry Pi Enclosure v1 Assembly 



Step 3 




• Now attach the two smaller sides, and hold the whole assembly in your hand as shown 

• The side piece with the "Make: Pi" engraving should line up with the SD card slot on 
your Pi - you may have to push the Pi into place. 



a 



Step 4 





• Now slide the two larger side pieces into place. It doesn't matter what order you assemble 
them in. 



# You may have to put some pressure on the side pieces to get everything to fit 
together nicely, but that's ok, it's supposed to be a tight fit. 

• If you're using the included Pi Cobbler, install it on the headers and slide the ribbon 
cable through the side piece before assembling. 

© Make Projects www.makeprojects.com Page 3 of 4 








Raspberry Pi Enclosure v1 Assembly 



Step 5 




• Now insert the four small lock 
pieces into their slots. 

• That's it, you're done! 



This document was last generated on 201 3-01 -28 05:52:01 PM. 



© Make Projects 



www.makeprojects.com 



Page 4 of 4